淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
 
 

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装

 

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office

          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档:


Nexxim Simulator >
VerifEye and QuickEye Analyses >
   Copying a VerifEye or QuickEye Analysis       


Copying a VerifEye or QuickEye Analysis

Once a VerifEye analysis has been set up in the schematic editor, you can save a copy of the setup as a QuickEye analysis, so you can compare the results of the two types of analysis with the same setup.

1. Right-click on the VerifEye analysis in the Project window, and select Copy as QuickEye from the menu. The copy is made on the clipboard.

2. Select the project that is to contain the copy of the analysis. Right-click on the Analysis icon in the Project window, and select Paste from the menu. The copy is pasted into the list of analyses, with the default name “QuickEyeAnalysis.” Rename the analysis as desired.

Once a QuickEye analysis has been set up in the schematic editor, you can save a copy of the setup as a VerifEye analysis, so you can compare the results of the two types of analysis with the same setup.

1. Right-click on the QuickEye analysis in the Project window, and select Copy as VerifEye from the menu. The copy is made on the clipboard.

2. Select the project that is to contain the copy of the analysis. Right-click on the Analysis icon in the Project window, and select Paste from the menu. The copy is pasted into the list of analyses, with the default name “VerifEyeAnalysis.” Rename the analysis as desired.




HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


 

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系:mweda@163.com