淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Nexxim Simulator >
Command Line Controls >
Message Controls >
All Messages

All Messages

The –error.filter option controls all messages:

nexxim -error.filter=level [-o outputfile] input_file

The level is an integer characterizing errors based on their severity:

0 Trace messages

1 Status

2 Warnings

3 Errors

The option –error.filter=level allows errors with severity level or higher to go through and be posted. For example, -error.filter=2 will allow warnings and errors to be displayed, suppressing all trace and status messages.

Note

Nexxim issues a warning message if the circuit contains floating nodes or nodes with single connections. Only nodes with a single branch connection that is both conservative and constitutive are flagged. For example, the controlling nodes in a VCVS have a constitutive/behavioral/relational connection to the controlled nodes, but not a physical/structural/conservative connection, and therefore are not flagged.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com