淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Nexxim Simulator >
AMI Analysis >
AMI Analysis Outputs >
AMI Sampled Eye Diagrams

AMI Sampled Eye Diagrams

The sampled or statistical eye report generates the eye diagram but does not retain the transient data for further postprocessing. Nexxim can generate sampled eye diagrams of the waveform at four points in the circuit:

• The Initial Waveform shows the Piecewise Linear data input to the transmitter, including any jitter.

• The Waveform After Source shows the output from the transmitter.

• The Waveform After Channel shows the input to the receiver.

• The Waveform After Probe shows the output from the receiver.

To generate a sampled eye diagram, select Create Statistical Eye Report>Statistical Eye Plot. Select your AMI Analysis as the Solution; UI as the Domain; Eye as the Category; InitialWaveform, WaveformAfterSource, WaveformAfterChannel, or WaveformAfterProbe as the Quantity Type; and <none> as the Function. The chart below shows the Wave After Channel.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com