淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
 
 

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装

 

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office

          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档:


Netlist Editor User Guide >
   Netlist Editor Operation >
       Going to a Numbered Line           


Going to a Numbered Line

Errors and warnings from the netlist parser refer to line numbers in the netlist. Line numbers are not displayed in the Netlist Editor, but you can move the cursor to a line by specifying its number. To move the cursor to a numbered line, select Edit > Go to or press Ctrl+g. Either operation opens the Go To Line dialog box.

The parenthesized display shows the range of available line numbers in the netlist that is currently being edited:

1. Enter the number of the line and click OK.

The cursor moves to the beginning of that line.




HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


 

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系:mweda@163.com