淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
 
 

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装

 

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office

          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档:


Using Component Libraries >
Using the Symbol Editor >
   Creating a New Symbol       


Creating a New Symbol

To create a new symbol, do either of the following:

 

• 1. Open the Tools > Edit Configured Libraries > Symbols dialog, then click Add Symbol. The Get Name dialog box opens.

2. Type a name for the symbol into the Enter the name for this new Symbol box, and then click OK or press ENTER.

3. Double-click the entry for the new symbol, or click Edit Symbol.

The symbol editor opens.

 

• 1. Open the Tools > Edit Configured Libraries > Symbols dialog, and then locate and select an existing symbol on which you would like to base your new symbol.

2. Click Clone Symbol(s). The Get Name dialog box opens.

3. Type a name for the new symbol into the Enter the name for this new Symbol box, and then click OK or press ENTER.

4. Double-click the entry for the new symbol, or click Edit Symbol.

The symbol editor opens.




HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


 

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系:mweda@163.com