淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Using Component Libraries >
Component Definition Overview >
Library Concepts >
Adding Libraries to the Search Path

Adding Libraries to the Search Path

Libraries must be configured—that is, the lists of their contents must be added to Designer’s library configuration for a particular circuit in a project—before you can use any components and definitions they contain. A basic subset of syslib libraries is configured by default for all circuits in new designs, but additional system libraries, including those for vendor components, and libraries in userlib and PersonalLib, must be manually configured before first use.

When vendor components are loaded, the libraries of the top-level schematic are automatically loaded into any existing subcircuit(s). This is because for same-product designs, the syslib configuration, when loaded, is automatically copied to the new design library, userlib, and PersonalLib. Each circuit design within a project may have a different library configuration.

To configure a new library to a design:

1. Highlight the design in the Project Tree.

2. Click Tools > Configure Libraries. The Configure Design Libraries dialog opens.

3. Use the dialog to navigate to the System, User or Personal library you want to add.

4. Use the >> button to add a selected library to the Configured column. To add this library to any future circuits you insert, check Save as Default.

5. Click OK.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com