淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
　
　

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装
　

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office
          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档：

Layout Editor User Guide >
   Configuring a Stackup >
       Setting the Layer Upper Elevation           


Setting the Layer Upper Elevation

The upper elevation of a layer is the highest point of the layer.

1. In the Edit Layers window, click the Stackup tab.

2. In the Upper Elevation column, double-click a layer’s Upper Elevation text box.

3. Type a new value and its units in the text box.

The value can be specified using a number (e.g., 0.5um), a variable (e.g., $H), or an expression (e.g., $H-0.5um+$W). If the Drag Mode is “manual align,” the variable or expression is entered as the value. For any other Drag Mode setting (including no setting, as with a dielectric layer), the variable or expression is evaluated to a constant value and the constant value replaces the variable or expression. A message box appears for you to confirm the replacement.

4. Press Enter.

The layer is assigned the upper elevation you entered.

 

Note

The value in the Upper Elevation text box will automatically adjust itself based upon the value in the Thickness text box. The value in the Thickness text box will automatically adjust itself based upon the value in the Upper Elevation text box.


HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


　

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com