• 首页
• HFSS教程
• ADS教程
• CST教程
• 射频工程师培训
• 微波仪器操作培训
• 天线设计培训
• 射频专业基础课

Ansoft Designer / Ansys Designer 在线帮助文档：

Layout Editor User Guide >
Drawing a Model >
   Drawing Geometric Objects >
       Drawing a Line           

Drawing a Line

Draw an object with one or more straight segments using the Draw > Primitive > Line command.

1. On the Draw menu, point to Primitive, and then click Line.

2. Select the first point of the line in one of the following ways:

• Click the mouse on the point.

• Type the point’s coordinates in the X and Y text boxes.

3. Select the next point of the line using the mouse or the keyboard. Notice that Designer draws a line between the two points.

• To delete the last point that was entered, press Backspace or right-click and select Back Up.

• To delete all selected points and start over, press Esc or right-click and select Cancel.

4. Repeat step 3 for each point to be entered.

5. Complete the line in one of the following ways:

• Double-click the final point of the line.

• Press Enter or right-click and select Finish.

The line is added to the active layer.

You can edit the line’s properties in the Property Control windowto change the line’s width, bend type, and end type in the Line Styles window.

Stitch Lines

Use the Layout > Stitch Lines command to stitch together connected/crossing lines into polygons and lines. Selected lines with zero width will be united to form polygons when the segments close. Selected zero-width lines are first split at all points of intersection. Then lines are stitched together into polygons. Stitching is done in such a way as to avoid forming lines that cross.

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com