淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
 
 

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装

 

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office

          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档:


Importing and Exporting Data >
   ODB++ Translator >
       Running AnsTranslator from the Command Line           


Running AnsTranslator from the Command Line

 

The format for running AnsTranslator from the DOS command line is:

AnsTranslator <input> <output> <switches>

where:

• AnsTranslator is the complete path to AnsTranslator.exe

• <input> is the required path to the ODB++ job file (.tgz) or top directory

• <output> is the optional path to the ANF file

• <switches> are any of the following options:

  -c : Path to control-file (.xml)

  -l  : Path to log-file (.log)

  -v : Specifies verbose logging (without this option, only warnings and errors are logged)

-nc : Specifies that no component or footprint be translated (padstack and net are still translated)

  -o : Output format. Choices are ANFV2 and ANFV4 (default)

 

The following considerations apply:

1. If <output> is not specified, the translated ANF file is created in the same directory as the <input> file/directory.

2. If “-c” is not specified, the control file is still used (.xml), as long as it has the same name and path as the <input> file/directory.

3. If “-l” is not specified, the log file is created in the same directory as the <output> ANF file.

4. if “-o” is not specified, the output default is ANFV4.

 




HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


 

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系:mweda@163.com