淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Designer File Formats >
Compact FLP Data File >
Three-Port Data

Three-Port Data

Form

header
* Data for first frequency
[f1] a11 b11 a12 b12 a13 b13
      a21 b21 a22 b22 a23 b23
      a31 b31 a32 b32 a33 b33
* Data for second frequency
[f2] a11 b11 a12 b12 a13 b13
      a21 b21 a22 b22 a23 b23
      a31 b31 a32 b32 a33 b33
.

where header is the FLP data bank header.

The entries f1, f2, ... represent frequencies. The indexing system in the form above identifies the matrix elements of the network parameters at each sweep point. Depending on the format that is used, the matrix coefficients a and b are magnitude and phase (in degrees) or real and imaginary components of the data type that is specified by the code.

Example

MY_DIPLEXER 2GHZ 6GHZ 3 50 1
2-GHz low-pass and 6-GHz high-pass diplexer, distributed design
2.000GHZ 0.183 7.6 0.993 -130.7 0.016 151.6
            0.993 -130.7 0.183 -73.7 0.0 22.1
            0.016 151.6 0.0 22.1 0.993 125.5
4.000GHZ 0.345 -39.9 0.8 49.8 0.504 76.7
            0.8 49.8 0.526 -51.5 0.3 136.4
            0.504 76.7 0.3 136.4 0.81 -4.3
6.000GHZ 0.036 91.8 0.0 -145.9 0.999 -122.5
            0.0 -145.9 0.999 -115.9 0.0 89.6
            0.999 -122.5 0.0 89.6 0.04 -155.5

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com