淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
　
　

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装
　

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office
          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档：

Nexxim Simulator >
Nexxim Component Models >
Independent Sources >
   Shot Noise Source, Voltage       

Shot Noise Source, Voltage

 

Voltage Shot Noise Source Netlist Format

A voltage shot noise source is just a DC=0 voltage source with a NOISEVEC parameter:

VSHOTNOISExxxx n+ n- DC=0 NOISEVEC=[f1,psd1, ... fn,psdn]

n+ is the positive node and n- is the negative node of the voltage source. The NOISEVEC parameter applies the specified power spectral density at each specified frequency.

 


Shot Noise Voltage Source Parameters

Parameter

Description

Unit

Default

NOISEVEC

List of shot noise frequencies (f1...fn) and corresponding noise power spectral densities (psd1...psdn), in pairs.

The sequence of frequencies must be monotonically non-decreasing.

Hertz,
Volt2/Hertz

None

Voltage Shot Noise Source Netlist Example

VSHOTNOISE32 net_1 0 DC=0 NOISEVEC=[1e6,2.7,2e6,3.4,3e6,10.37]

 



HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


　

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com