淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Nexxim Simulator >
Nexxim Component Models >
Nexxim Ideal Distributed >
Open Stub, Electrical Length with Reference

Open Stub, Electrical Length with Reference

Netlist Format

An instance of an ideal open stub, electrical length with reference has the following netlist syntax:

Axxx n1 n2 Z=val E=val A=val F=val COMPONENT=ideal_open_stub_electrical

n1 is the name of the node attached to the open stub. n2 is the name of the reference node. The entry COMPONENT=ideal_open_stub_electrical identifies the element as an ideal open stub, electrical length, with or without a reference node.

**Ideal Open Stub with Electrical Length, Instance Parameters**
Parameter	Description	Units	Default
Z	Characteristic impedance	Ohm	50.0
E	Electrical length at reference frequency	Degree	45
A	Attenuation constant at reference frequency	dB/m	0.0
F	Reference frequency for E	Hz	1e9

Netlist Example

A44 Port1 Port2 E=45 F=1.0e9 COMPONENT=ideal_open_stub_electrical

Notes

1. The open stub, electrical length model is equivalent to a transmission line model followed by an open model. This is also true in the case of negative length specifications, which are used for deembedding purposes. Note that in the latter case, the open stub model is equivalent to the transmission line model with a negative length terminated by an open.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com