NXMATLABPROBE — Ansoft Designer 7.0 在线帮助文档，Ansys Designer 教程

淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

MATLAB Probe Netlist Format

A MATLAB probe allows the user to pass transient analysis data to a MATLAB script (MATLAB™ is a trademark of The Mathworks, Inc.). The netlist syntax is:

AMATLABPROBExxxx positive negative COMPONENT=MATLAB_PROBE
+ SCRIPTFILE='file-reference'
+ BITSOURCE=name
+ BITWIDTH=val
+ TYPE=0|1
+ STEP_SIZE=val
+ [Param1=[val [,val]...]]
+ [Param2=[val [,val]...]]

+ ...
+ [Param10=[val [,val]...]]

positive and negative are the nodes connected to the AMI probe. The entry COMPONENT=AMI_PROBE identifies the element.

**MATLAB Scope Parameters**
Parameter	Description	Unit	Default
SCRIPTFILE	File containing MATLAB script	None	None
BITSOURCE	Netlist name of the source for the bit pattern for transient analysis to use	None	None
BITWIDTH	Bit width or unit interval	Second	1e-9
TYPE	Data format type. 0 = time, voltage 1=Fibre Channel standard	None	0
STEP_SIZE	For Fibre Channel data only. Fixed step size to interpolate transient result. STEP_SIZE must be set >0 for Fibre Channel.	Second	0.0 (Simulation will not run with the default value)
Param1 ... Param10	Up to ten parameters. Each parameter can be a single numeric or string value, or vector of numeric or string data.	None	None

MATLAB Probe Netlist Example

AMATLABPROBE1 net_34 net_27 COMPONENT=MATLAB_PROBE
+ SCRIPTFILE='my_MATLAB_script'
+ BITSOURCE=V1
+ BITWIDTH=1ns
+ TYPE=1
+ STEPSIZE=0.01ns
+ Param1=0
+ Param2='true'
+ Param3=[0, 1, 2, 3]
+ Param4=['true', 'false']


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com