Thermal Loss Calculation Settings
2D/3D Field Postprocessing Thermal Losses
This dialog box allows to compute all thermal
losses from the current project. Afterwards it is possible to import
these losses into a thermal project.
Consider surface losses on boundaries
Allows to define if thermal surface losses on
boundary conditions should be taken into account.
Use triangle based surface loss calculation method
This check-box allows to switch between two
surface loss methods. The triangle based method is less dependent on the
mesh and allows a better export of surface losses to external thermal
projects. If this check-box is deactivated the surface losses are more
dependent on the mesh resolution, but in some cases also more accurate.
Default conductivity for PEC
Thermal surface losses can be calculated for
PEC solids if a default conductivity value is entered here.
Calculate selected losses only
To calculate thermal losses for certain results
only, activate this checkbox and select one ore more sources from the
list below.
Calculate
Accepts the settings and start
the calculation and export.
Cancel
Closes this dialog box without
performing any further action.
Help
Shows this help text.
See also
Thermal
Stationary Solver Overview, Thermal
Transient Solver Overview, Thermal
Loss Distribution, Thermal
Loss Distribution Overview
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|
淘宝官方店 
