淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
　
　

CST视频教程推荐   CST微波工作室入门与应用详解   |  CST使用操作基础
          首页 >> CST教程 >> CST2013在线帮助系统

Boundary Conditions - Boundary Temperature

 Simulation: Settings Boundaries Boundary Temperature

A boundary temperature may be assigned only if the corresponding boundary condition in the "Thermal Boundaries" tab is set to "isothermal".

Xmin, Ymin, Zmin, Xmax, Ymax, Zmax

Defines the boundary temperature at the specific boundary. Three different settings are possible:

Default

The background temperature will be used as a constant temperature at the boundary.

Fixed

A specific temperature value will be assigned to the boundary. During the transient solution this value will be changing according to the reference excitation signal.

Floating

Similar to Fixed the boundary will also have a constant temperature. However its initial value is unknown and will be calculated during the simulation, such that the total thermal heat flux is zero.

Note: In case other isothermal boundaries or PTC solids with fixed or floating temperatures are touching a default boundary these settings will overwrite the "Default" setting.

 

OK

Accepts the changes and closes the dialog.

Cancel

Closes this dialog box without performing any further action.

Help

Shows this help text.

See also

Boundaries, Thermal Boundaries, Symmetry Planes, Phase Shift/Scan Angle, Unit Cell

 



HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


　

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com