Farfield Plot – Array
Plot Properties  Properties Array
Antenna pattern frame
Single antenna:
Default setting to plot the farfield of the current modeled antenna structure.
Antenna array:
Activates the settings of an antenna array based on the current modeled
single antenna structure and allows you to design arbitrary array patterns
by clicking on Properties... This
opens the Farfield Array Dialog
Box, where you may define the general properties of the array
OK
Stores the current settings
and closes the dialog box. Depending on the new settings, a new plot of
the farfields will be calculated. The calculation can be aborted by pressing
the Abort button.
Apply
Stores the current settings
leaving the Farfield Plot
tab sheet opened. Depending on the new setting,s a new plot of the farfields
will be calculated. The calculation can be aborted by pressing the Abort button.
FF View / Preview
Use this button to switch between
farfield view and coordinate system preview. The latter hides the farfield
and shows only the structure in respect to the defined coordinate system.
In addition, Bistatic RCS results visualize the exciting plane wave. Leaving
the preview mode with pressing Close restores axes, origin, and mirror plane settings.
Abort
Aborts the current calculation.
Note that the last plot has been deleted. You will have to calculate a
new plot by making the appropriate settings and pressing the OK or Apply button
again.
Close
Closes this dialog box without
performing any further action.
Help
Shows this help text.
See also
Farfield
Overview, Farfield View,
Color Ramp, Farfield
Plot
Farfield Plot Dialog Pages:
General,
View,
Plot Mode, Axes,
Origin,
Phase
Center, Decoupling
Plane
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|
淘宝官方店 
