Enter Edge Numerically
Picks PicksPick Edge from Coordinates
In this dialog box you may enter the coordinates of an straight edge
which will then be treated just like an edge picked from the model. Usually
you will use this edge as the axis for a rotation body.
Depending on the currently active
you will either specify the edge end point coordinates in global and local
coordinates, respectively.
X1/Y1/Z1
Specify valid
for the start point of the straight edge in 3D space. Please note that
these entries only appear when the global coordinate system is currently
active.
X2/Y2/Z2
Specify valid
for the end point of the straight edge in 3D space. Please note that these
entries only appear when the global coordinate system is currently active.
U1/V1/W1
Specify valid
for the start point of the straight edge in 3D space. Please note that
these entries only appear when a local coordinate system is currently
active.
U2/V2/W2
Specify valid
for the end point of the straight edge in 3D space. Please note that these
entries only appear when a local coordinate system is currently active.
OK
Press this button to store the edge. The edge
will then appear in the List of Picked
Edges dialog box.
Preview
Press this button to create a preview image
of the edge.
Cancel
Closes this dialog box without performing any
further action.
Help
Shows this help text.
See also
List of
Picked Edges, Coordinate
Systems Overview.
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|
淘宝官方店 
