Copy and Paste Solids
Clipboard Copy ,
ClipboardPaste
One or more selected solids (and components) can be copied into the
Windows clipboard by selecting the Copy
operation from the Edit menu.
The corresponding material properties are also kept alongside with the
geometry information. The origin for the exported objects will be taken
from the currently active coordinate system (either global or local).
Once solids are stored in the clipboard, selecting the operation Paste from the Edit
menu will add the corresponding solids to the current model. Potential
naming conflicts are resolved by adding e.g. _1 to the newly created solids
or materials. The objects will be placed into the currently active coordinate
system. This allows changing both, orientation and location of the pasted
solids as compared to their original positioning.
There is also the possibility to define a target component in which
the copied solids and/or components should be copied into. Therefore a
component must be selected before performing Paste.
With the paste operation you have the possibility to align
your model in the current project. The positioning algorithm also
transforms your model such that the middle points of the picked faces
are at the same position.
Please note: The
copy / paste operation works within the same model and across different
models.
See also
Coordinate
systems, Import
Sub-Project, Align
Mode
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|
淘宝官方店 
