Optimizer - Info

Home: Simulation Optimizer

Home: Simulation Start Simulation Optimizer

Home: Simulation Start Simulation Optimizer

Home: Simulation Start Simulation Optimizer

 

 This property page summarizes information about the optimization process. The displayed information varies depending on the optimizer type.

Simulation type and general controls

See Optimizer help page.

Pass m / N

Indicates that the mth optimizer pass of a total of N passes is running (does only apply to the Interpolated Quasi Newton optimizer, see Optimizer - Settings ).

Number of evaluations

Displays the total number of evaluations of goals currently done by the optimizer.

The total number is split into the number of evaluations based on solver runs and the number of evaluations based on interpolations of primary data (does only apply to the Interpolated Quasi Newton optimizer, see Optimizer - Settings).

First goal function value

Displays the total goal value of the initial parameter setting.

Last goal function value

Displays the total goal value of the latest parameter setting.

Best goal function value

Displays the total goal value of the current optimal parameter setting.

Best parameters so far

Displays the current optimal parameter value for each parameter selected for the optimization run. It is also noted if sensitivity information for this parameter is exploited.

 

See also

Optimizer Overview, Optimizer - Interpolation of Primary Data, Optimizer Goals, Optimizer Settings,  Solver Overview

 




HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


 

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系:mweda@163.com