首页 >> CST教程 >> CST2013在线帮助系统 |
Monostatic RCS Sweep PropertiesSimulation: Solver Start Simulation Integral Equation Solver Specials RCS Sweep SettingsNote: A change of the monostatic RCS sweep properties also changes the corresponding Asymptotic Solver Parameters. Incident field settings frame The list can contain a number of polarization definitions for describing the orientation of the incident plane waves' field vectors. Depending on the particular type of the polarization, each list item may either be a horizontal, vertical, left hand circular (LHCP), right hand circular (RHCP) or custom polarization. You can add or delete polarizations from the list by pressing the Add or Delete buttons. If a polarization definition is selected, you may also edit its properties by pressing the Edit button. Observation angle sweeps frame The list can contain a number of angular sweep definitions for describing the observation directions for which the scattered farfields and the RCS results will be calculated. Depending on the particular type of the sweep, each sweep may either be a single point, a one dimensional theta or phi sweep or a two dimensional theta and phi sweep. By defining more than one excitation angle sweep you can specify non-uniform angular samplings as needed. You can add or delete angular sweeps from the list by pressing the Add or Delete buttons. If a angular sweep definition is selected, you may also edit its properties by pressing the Edit button. OK Store the specified setting sand close the dialog box. Close Closes this dialog box without performing any further action. Help Shows this help text. See also Asymptotic Solver Parameters, Asymptotic Solver Angle Sweep, Asymptotic Solver Polarization, .
HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程 |
Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系:mweda@163.com |