Mode Impedance and Calibration
 Simulation:
Sources and Loads  Waveguide Port Define Lines...
Impedance, calibration and polarization lines are
currently available only for models with tetrahedral mesh representations.
Mode / Impedance / Calibration / Polarization table:
This table shows the impedance,
calibration and polarization lines used for the respective mode. You may
change the settings of each table entry by selecting the desired cell
of the table and either rename the mode or change the line for the impedance,
calibration or polarization by using the dropdown list box in the respective
table cell.
Add...:
Opens the Impedance and
Calibration Line dialog box to define lines that may be used as
impedance, calibration and polarization lines for a specific mode.
Rename:
This button is only activated
if one row in the Mode / Impedance / Calibration / Polarization table
is selected. If pressed, the focus is set to mode number of the selected
row, enabling you to change the mode number. However, you may also rename
the mode number if you first select the desired row in the table, click
directly on the mode number to be changed and type the new mode number.
Delete:
This button is only activated
if one row in the Mode / Impedance / Calibration / Polarization table
is selected. If pressed, the selected row will be deleted from the table.
Clear:
If pressed, all previously
defined lines and modes will be deleted.
Copy:
This button is only activated
if one row in the Mode / Impedance / Calibration / Polarization table
is selected. If pressed, the settings of the selected row are copied and
inserted at the end of the table.
OK
Closes the dialog box and returns
to the Waveguide Port dialog box. If
any modes are defined, the according check box in the Ports dialog will
be checked to automatically activate this feature.
Help
Shows this help text.
See also
Impedance
and Calibration Line, Waveguide Port, Waveguide
Port Overview
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|
淘宝官方店 
