Define Modal Frequency Goal
 Simulation:
Solver  Start Simulation Optimizer Goals Select Modal Frequency Goal Edit
Please note that modal frequency goals cannot
be defined any more. When you open a project which contains modal frequency
goals, then they will be converted automatically to a corresponding 0D
Result Template Goal.
In this dialog box, you may modify the mode and the
frequency that is being evaluated while the optimizer is running for the
selected goal. In addition, you may define how the data will be evaluated.
Mode / Weight frame
Mode: Select the mode used for the evaluation of the goal out of
the drop list.
Weight: Enter the weight of this goal here.
Conditions frame
Operator:
You may select an operator from this drop list. The operator effects
how the data is being evaluated during an optimization run. Currently,five
different operators are available for the modal frequency goal.
<: The optimizer tries to find
a parameter setting where the modal frequency of the selected mode becomes
lower than the given target frequency.
>: The optimizer tries to find
a parameter setting where the modal frequency of the selected mode becomes
higher than the given target frequency.
=: The optimizer tries to find
a parameter setting where the modal frequency of the selected mode becomes
as close as possible to the given target value.
min: The optimizer tries to find
a parameter setting where the modal frequency of the selected mode becomes
minimal.
max: The optimizer tries to find
a parameter setting where the modal frequency of the selected mode becomes
maximal.
Target
Frequency: Enter the target frequency here.
OK
Stores the current settings
and returns to the Optimizer
- Goals property page. The new defined goal is added to the list
of defined goals in the Optimizer
- Goals property page.
Cancel
Closes this dialog box without
performing any further action.
Help
Shows this help text.
See also
Optimizer
Overview
Optimizer: Goals
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|
淘宝官方店 
