Modify Material Properties
Post
Processing: 2D/3D Field Post Processing Loss and Q Calculation [Modify.../Modify all...]
Modify the properties for the material specified
in the field "Material."
Material
Shows which material you have selected in the Q-Factor
Calculation dialog box. If the field contains the text ”Set All
Materials,” your settings in this dialog box will be taken for all
materials listed in the Q-Factor Calculation dialog box. This field is
output only.
Conductivity frame
To enter a finite conductivity, PEC
must be unchecked. The unit is Siemens per meter (S/m). To set the material
to be perfect conducting, check the option PEC.
Rel. Permeability (Mue)
Enter here the material’s relative permeability.
OK
Takes the current settings and closes the dialog
box.
Cancel
Closes the dialog box without performing any further
action.
Help
Shows this help text.
See also
Q-Factor
Calculation
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|
淘宝官方店 
