Import STEP
Modeling:
Exchange Import/ExportImport3D FilesSTEP (203, 214)
The Standard for the Exchange of Product
Model Data, better known as STEP, is an international standard for exchanging
data between different CAD/CAM and Product Data Management (PDM) systems.
It represents a viable alternative in case your CAD system does not support
the native SAT file format. Supported version are AP203 and AP214 (geometry only).
Open
Opens the selected STEP file,
adds its data to your model and leaves the dialog box.
Cancel
Closes this dialog box without
performing any further action.
Copy file to project
Use this option to copy the
import file to the project folder. If you save your project to another
destination the imported file is copied automatically. For more information
see Copy_file_to_project.
Healing
Enable this check button to
heal the structure after it is imported. Healing checks the imported structure
and tries to repair it if necessary.
Scale to current unit
Enables scaling of the imported model to the currently
active unit. If not activated the import feature uses the source units.
In such a case, no scaling occurs.
Import attributes
Enables the import of solid names, material names
and material color from the import file.
Note: Importing
the attributes usually needs more memory.
Help
Shows this help text.
See also
Importing
and Exporting Models
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|
淘宝官方店 
