Slot
Shapes Faces and AperturesSlot
In this dialog box you may specify the properties of a slot. Slots
are used to represent a narrow aperture in a thin metal face.
It is intended for apertures that are too narrow to be effectively modeled
as features in the geometric model.
Name
Specify a unique
name for the slot.
Type
Here you select
the type of the Slot. Slot can be modeled as slot, seam or transfer impedance.
Dimensions frame
Depth / Overlap
/ Frequency: Depending on type selected, specify here the width
or overlap or frequency of the slot.
Gap / Transfer
impedance: Depending on type selected, specify here the gap or
transfer impedance of the slot.
Number of segments:
Specify here the number of segments of the slot.
Permittivity: Specify
here the permittivity of the slot.
Conductivity:
Specify here the conductivity of the slot.
Points frame
In this frame you can define list of points describing
the location (path) of the slot. The point list must form a path on the
surface of the metal face.
Picked edge:
This option is activated if edge is selected before opening the slot dialog.
The selected edge(s) coordinates will be listed in
the list box.
Picked point:
This option is activated if points are selected before opening the slot
dialog. The selected points will be listed in the list box.
Arbitrary point:
When this option is activated you can specify the
arbitrary points in the list box.
Insert:
Inserts a new point into the list above the currently selected point.
Delete:
Deletes the currently selected point from the list.
Clear: Deletes
all points from the list.
OK
Press
this button to finally create the slot.
Cancel
Closes
this dialog box without performing any further action.
Help
Shows
this help text.
See also
Vent
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|
淘宝官方店 
