Simplify Model
Mesh  Global Properties
[Simplify Model]
SolverStart Simulation
[Simplify Model]
Use this dialog to globally reduce the complexity
of your model.
Settings apply to
Solver:
The simplification is used for the selected solver only.
Mesh: The
settings are used for the displayed mesh type only.
General
Simulate
lossy dielectrics as lossfree: All lossy normal materials are treated
as lossfree. In the Time Domain solver, the epsilon and mue infinity values
of the dispersive material model are considered. The Frequency Domain,
Integral Equation, and Eigenmode solvers take into account the dispersion
of the real part of the complex permittivity and permeability only. This
applies if the default settings are active. For a comparision with the
Time Domain solver, please enable the Time Domain compatibility option
for materials in the corresponding solver specials.
Simulate
surf. impedance as PEC: All
surface impedance materials (i.e. Lossy metal, Corrugated wall, Ohmic
sheet and Tabulated surface impedance as well as coated materials) are
treated as PEC.
Wires
Zero
wire radius: The wire radius is globally set to zero for all wires.
(This setting is only available for hexahedral mesh.)
Apply thin
wire model to solid wires: Ignore all solid wire definitions.
Simulate lossy metal as PEC:
All lossy wires are treated as PEC.
OK
Press this button to apply the specified simplifications.
Cancel
Closes this dialog box without performing any
further action.
Help
Shows this help text.
See also
Mesh
Properties (Hexahedral), Mesh
Properties (Tetrahedral)
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|
淘宝官方店 
