Farfield&Antenna / Farfield Result
Result Templates Template Based Post Processing
This template allows the easy definition of a farfield watch or goal.
It offers you a wide variety of options (3D plot, polar plot and single
direction), of values, plot modes and components (including e.g. Ludwig3,
which is required for Co- and Cross-Polarization calculation). For a more
detailed explanation of the settings please refer to the Farfield
Overview.
The template offers to define and choose from "Quick-Configurations" for commonly
used tasks. Selecting such a quick configuration will automatically do
all settings in the dialogues underneath. So a quick configuration can
also be a good starting point for setting similar tasks. Selecting the
Advanced button will open the
dialogue with full access to all settings. Here you could also store a
new setup via button Store Setup
to access the new configuration afterwards through comfortable Quick
Configuration list for other projects.
Besides standard farfiled and RCS extraction, the template also allows
processing of Mean Effective Gain and Multiplexing Efficiency. Those result
values are accessable after switching to type=3D. More information on
the defintions can be found here: Farfield&Antenna
/ Diversity Gain and Correlation (from Farfield).
Please note: all farfield templates
have a separate entry for Excitation
String which has to be changed and entered manually, if different
from port 1. For RCS simulations, the excitation string has to be changed
to [pw] (plane wave), for excitation at port 4 please fill in [4].
Please note: if you use this
template in CST DESIGN STUDIO, it may fail if no 3D results are present,
although a preceeding circuit simulation succeeded. This happens if the
circuit simulation reads the S-Parameters from the CST MICROWAVE STUDIO
cache. To prevent this you can either delete the cache using the context
menu of the CST MICROWAVE STUDIO block, or add an AC task with enabled
Combine Results.
The latter will always force a 3D simulation if no 3D results are present,
regardless of the cache.
OK
This button completes the setup of the template.
The new entry will be added to the list of templates which are executed
automatically after each run. The default name of the template is set
according to the settings, as long the name has not been changed manually.
Cancel
Aborts the setup of the template and closes
this dialog box without performing any further action.
Help
Shows this help text.
See also
Preloaded
Result Templates, Farfield
Overview
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|
淘宝官方店 
