淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
　
　

CST视频教程推荐   CST微波工作室入门与应用详解   |  CST使用操作基础
          首页 >> CST教程 >> CST2013在线帮助系统

ADS Simplification

Modeling: Exchange Import/Export3D FilesADS Model Open

This dialog box enables you to smooth segmented circles and arcs or to remove tiny edges from the ADS model.

The two pictures below are show a small part from an ADS import. The left one is shown without simplification and the right one is shown with default simplification settings:

 

   

Use simplification.

Selecting or de-selecting this checkbox identifies whether the ADS model is imported with or without the specified settings below.

Circle/arc conversion frame

Arc resolution (degree)

 

The maximum angle in degrees between two adjacent segments. All smaller angles will be considered to be converted to arcs. The angle is only used for arcs and not for circles.

 

Radius tolerance (percent)

 

The maximum deviation in percent of the distance between a segment endpoint and the current definition of the circle center point. The tolerance is used for circles and arcs.

 

Small edge removal frame

Minimum edge length

 

Edges smaller than the defined length will be removed; this may be used to remove tiny fragments.

OK

Pressing this button will start the import.

Help

Shows this help text.



HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


　

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com