Table Object

This object offers access and manipulation functions to result tables. A table contains a collection of individual data items. Each of these data items is associated with a particular parameter combination and can be a either single 0d result (real or complex data value) or an entire xy data set.

• Initialization, File Operation

• Access to General Table Data

• Access to Table Parameters

• Access to Data Items

Initialization, File Operation

Construction

A Table object can be created as follows:

From within CST MICROWAVE STUDIO

dim objName as object

set objName = Table("adapt_error.tab")

From an external progam

dim objName as object

set objName = CreateObject("CSTStudio.Table")

objName.Load("adapt_error.tab")

While ”adapt_error.tab” is the name of the result table which should be loaded into the Table object.

Load ( filename sTableFileName)

Loads a result table file named sTableFileName into the current Table object.

 dim res as object

 set res = CreateObject("CSTStudio.Table")

 res.Load("adapt_error.tab")

Save ( filename sTableFileName)

Saves the current Table object with the given filename sTableFileName. If the specified file name is an empty string, the table data will be stored under the same file name as it has been specified when loading the table data.

ExportData ( filename name )

Exports the contents of the currently loaded table into an ASCII text file specified by its name. The results of all parameter combinations will be exported.

Access to General Table Data

GetName string

This method returns the name which has been assigned with the current table.

GetType string

This method returns a string containing the type of the current table, e.g. "xysignal".

GetSubtype string

This method returns a string containing the sub-type of the current  table, e.g. "linear".

Access to Table Parameters

GetNumberOfParameters long

This method returns the number of parameters which are associated with the data of the current table object.

GetParameterNameFromIndex ( long index ) string

This method returns the name of a parameter by specifying its index. The index must be within the range of 0 to GetNumberOfParameters - 1.

GetParameterValueFromIndex ( long index ) double

This method returns the current value of a parameter by specifying its index. The index must be within the range of 0 to GetNumberOfParameters - 1. This value will be used when the table properties dialog box is opened.

GetVaryingParameter long

Returns the index of the currently varying parameter. This setting will be used as initial choice when the table properties dialog box is opened.

SetVaryingParameter ( long index )

This methods sets the currently varying parameter.  The index must be within the range of 0 to GetNumberOfParameters - 1. This setting will be used as initial choice when the table properties dialog box is opened.

Access to Data Items

GetNumberOfDataItems long

This method returns the total number of data items contained in the table.

GetTypeOfDataItem ( long index ) string

This method returns a string containing the type of the data item specified by its index. The index must be within the range of 0 to GetNumberOfDataItems - 1. The type can be any one of the following strings:

GetParameterValueOfDataItem ( long dataindex, long parameterindex ) double

This method returns the value of a parameter corresponding to the data item specified by its index (dataindex). The parameter itself is speicifed by its index, too (parameterindex). The dataindex must be within the range of 0 to GetNumberOfDataItems - 1 and the parameterindex must be within the range of 0 to GetNumberOfParameters - 1.

GetIndexOfLastAddedDataItem long

This method returns the index of the data item that was the last one added to the table.

Get0DDataItem ( long index  ) double

This method is only available when the type of the data item is "0d real". The return value is the actual real value of the data item specified by its index. The index must be within the range of 0 to GetNumberOfDataItems - 1.

Get0DDataItemRe ( long index  ) double

This method is only available when the type of the data item is "0d complex". The return value is the real part of the actual complex value of the data item specified by its index. The index must be within the range of 0 to GetNumberOfDataItems - 1.

Get0DDataItemIm ( long index  ) double

This method is only available when the type of the data item is "0d complex". The return value is the imaginary part of the actual complex value of the data item specified by its index. The index must be within the range of 0 to GetNumberOfDataItems - 1.

Get1DDataItem ( long index ) Result1D

This method is only available when the type of the data item is "1d". The return value is a Result1D object containing the xy data curve of the data item specified by its index. The index must be within the range of 0 to GetNumberOfDataItems - 1.

Get1DComplexDataItem ( long index ) Result1DComplex

This method is only available when the type of the data item is "1d complex". The return value is a Result1DComplex object containing the complex data curve of the data item specified by its index. The index must be within the range of 0 to GetNumberOfDataItems - 1.