Project Object
The Project Object offers miscellaneous functions concerning the program in general.
ResetAll
Resets the actual project. All results will be deleted and all internal data structures will be reset to default values. However, the History List and the parameters will not be affected. You may restore the project (except for the results) with the Rebuild Function.
ScreenUpdating ( bool switch )
Switches the update of the results of the main view during the simulation on and off.
Sets the kind of QuickStartGuide.
SelectTreeItem ( string itemname ) bool
Selects the tree Item, specified by name. The main view will be updated according to the selection. A tree Item that is not the root Item may be specified by the full path. The return value is True if the selection was successful.
Example: SelectTreeItem ("Components\component1\solid1")
GetNumberOfSelectedTreeItems long
Returns the number of tree items which are currently selected.
GetSelectedTreeItem string
Returns the path name of the currently selected tree item or folder with regard to the root of the tree.
Example: If a solid named "solid1" is selected in the "component1" folder of the "Components" folder, the returned path name will be "Components\component1\sold1".
GetNextSelectedTreeItem string
Returns the path name of the next selected tree item or folder if multiple items are selected. You need to use GetSelectedTreeItem once before using this command.
Example: If a solid named "solid1" is selected in the "component1" folder of the "Components" folder, the returned path name will be "Components\component1\sold1".
SetLock ( bool switch )
Disables the interaction with the . No user actions can be made. After a VBA-Script has been executed, SetLock is automatically reset to False.
AddToHistory ( string header, string contents ) bool
Adds a new entry to the history list entitled header. The contents of the entry is stored in contents. This contents is executed through the VBA interpreter if this method is called. Therefore it must contain valid VBA commands for . If the new entry could be created and the contents could be executed AddToHistory returns True, otherwise False.
PositionWindow (string location, long handle)
This functions sets the position of a window relatively to the location of the main application window. The following settings are valid locations:
|
"center" |
Position the window in the center of the main application window |
|
"top left" |
Position the window in the top left corner of the main application window |
|
"top right" |
Position the window in the top right corner of the main application window |
|
"bottom left" |
Position the window in the bottom left corner of the main application window |
|
"bottom right" |
Position the window in the bottom right corner of the main application window |
The window which needs to be positioned is specified by its window handle. The typical usage of this function is in the initialization part of a user defined dialog box function as shown in the example below:
Private Function DlgFunc(DlgItem$, Action%, SuppValue&) As Boolean
Select Case Action%
Case 1 ' Dialog box initialization
PositionWindow "top right", SuppValue
Case 2 ' Value changing or button pressed
Case 3 ' TextBox or ComboBox text changed
Case 4 ' Focus changed
Case 5 ' Idle
Case 6 ' Function key
End Select
End Function
GetDataBaseValue ( string key ) string
GetDataBaseArrayValue ( string key, long index ) string
Provide access to the settings database. Returnes the data base value specified by key as a string.
Backup ( filename filename )
Creates a copy of the actual project and its results. The current project is not affected. 'filename' is the name of the copy.
FileNew
Resets the entire program. A new unnamed project will be opened.
OpenFile ( filename filename )
Opens an existing project. A previous project will be closed. 'filename' is the name of the project to be opened.
Quit
Closes the program without saving unless the structure of the project has been changed.
Save
Saves the current state of the project, including all results obtained so far.
SaveAs ( filename filename, bool include_results )
Saves the current state of the project, including all results obtained so far (optional with 'include_results''). 'filename' is the name of the project to be opened.
StoreInArchive ( filename filename, bool keepAllResults, bool keep1DResults, bool keepFarfieldData, bool deleteProjFolder )
Stores a project in a zip-file with the specified settings. You have the choice to include different sets of files. Either you include all calculated results ('keepAllResults'') or you can keep the calculated 1D results ('keep1DResults'') and/or the calculated farfield data ('keepFarfieldData'). 'filename' is the name of the project to be archived as well as the destination of the zip-file. The last option is to delete the project folder. Note that the project folder has to be deleted if none of the result/data files are included.
DeleteParameter ( string name )
Deletes an existing parameter with the specified name.
GetNumberOfParameters long
Returns the number of parameters defined so far.
GetParameterName ( long index ) string
Returns the name of the parameter referenced by the given index. The first parameter is reference by the index 0.
GetParameterNValue ( long index ) double
Returns the value of the double parameter referenced by the given index. The first parameter is referenced by the index 0.
GetParameterSValue ( long index ) string
Returns the numerical expression for the parameter referenced by the given index. The first parameter is referenced by the index 0.
RestoreParameter ( string name ) string
Gets the value of the specified string parameter.
RestoreDoubleParameter ( string name ) double
Gets the value of a specified double parameter.
RestoreParameterExpression ( string name ) string
Gets the numerical expression for the specified string parameter.
StoreParameterWithDescription ( string name, string value, string description )
Creates a new string parameter or changes an existing one, with the specified string value and the description.
StoreParameter ( string name, string value )
Creates a new string parameter or changes an existing one, with the specified string value.
StoreDoubleParameter ( string name, double value )
Creates a new double parameter or changes an existing one, with the specified double value.
MakeSureParameterExists ( string name, string value )
Makes sure that the parameter name is available. If it is already defined it is left unchanged. If there is no parameter name, it is created with the specified value.
SetParameterDescription ( string name, string description )
Defines the description for a given parameter, which is specified by its name.
GetParameterDescription ( string name ) string
Returns the description of a given parameter, which is specified by its name.
ClearGlobalDataValues
Clear all global data values.
DeleteGlobalDataValue ( string name )
Delete a global data value with a given name.
RestoreGlobalDataValue ( string name ) string
Returnes a global data value with a given name.
StoreGlobalDataValue ( string name, string value )
Creates a new global data value with a given name and value or changes an existing one.
Mathematical Functions / Constants
Returns the arc cosine of the input parameter as a radian value.
Returns the arc cosine of the input parameter in degree.
Returns the arc sine of the input parameter as a radian value.
Returns the arc sine of the input parameter in degree.
Returns the arc tangent of the input parameter in degree.
ATn2 ( double value1, double value2 ) double
Returns the arc tangent of the relation of value1 to value2 as a radian value.
|
value1 |
Numerator of the arc tangent calculation. |
|
value2 |
Denominator of the arc tangent calculation. |
ATn2D ( double value1, double value2 ) double
Returns the arc tangent of the relation of value1 to value2 in degree.
|
value1 |
Numerator of the arc tangent calculation. |
|
value2 |
Denominator of the arc tangent calculation. |
CLight double
Returns the constant value for the speed of light in vacuum.
Returns the cosine of the input parameter in degree.
Eps0 double
Returns the constant value for the permittivity of vacuum.
Evaluate ( string expression ) double
Evaluates and returns the numerical double result of a string expression.
im ( double amplitude, double phase ) double
Calculates the imaginary part of a complex number defined by its amplitude and phase.
Mue0 double
Returns the constant value for the permeability of vacuum.
Pi double
Returns the constant value of Pi.
re ( double amplitude, double phase ) double
Calculates the real part of a complex number defined by its amplitude and phase.
Returns the sine of the input parameter in degree.
Returns the tangent of the input parameter in degree.
FMod ( double value1, double value2 ) double
Returns the floating point remainder of value1 divided by value2.
ActivateScriptSettings ( bool switch )
This method activates (switch = "True") or deactivates (switch = "False") the script settings of a customized result item.
ClearScriptSettings
This method clears the internal settings of a previously customized result item.
GetLast0DResult ( string name ) double
This method returns the last 0D result of the selected result template. 'name' is the name of a previously defined result template.
GetLast1DResult ( string name ) Result1D
This method returns the last 1D result of the selected result template. 'name' is the name of a previously defined result template.
GetLast1DComplexResult ( string name ) Result1DComplex
This method returns the last complex 1D result of the selected result template. 'name' is the name of a previously defined result template.
GetScriptSetting ( string name, string default_value ) string
This function is only active if a result template is currently in process. It returns the internal settings of the previously customized result item using the StoreScriptSetting method. In case that no settings has been stored, the default value will be returned.
StoreScriptSetting ( string name, string value )
This function is only active if a result template is currently in process. It offers the possibility to customize the corresponding result item with help of internal settings, which can be recalled using the GetScriptSetting function. 'name' is the name defining the internal setting. 'value' is the value of the setting.
StoreTemplateSetting ( string setting, string value )
This function is only active if a result template is processed. It defines the type of the template and needs to be set in the define method of every result template. The variable 'setting' has to be the string "TemplateType". The variable 'value' can be"0D", "1D", "1DC", "M0D", "M1D" or "M1DC". The choice of the template type determines which evaluation method of the template is called when being processed and what return type is expected. More details can be found on the Post Processing Template Layout help page.
GetScriptFileName string
Returns the file name of the currently active script.
EvaluateResultTemplates
Evaluates all existing result templates. As well as after a solverrun or pushing 'Evaluate All' in Template Base Postprocessing dialog.
SetApplicationName ( string name )
Sets the application name ("EMS", "PS", "MWS", "MS", "DS for MWS", "DS for PCBS", "DS for CS", "DS for MS", "DS"). Use this function for developing a result template.
ResetApplicationName
Reset the application name to the default name. Use this function for developing a result template.
ResetTemplateIterator
Resets the template iterator to the beginning of the list of defined result templates and clears all template filters.
SetTemplateFilter( string filtername, string value)
Sets a filter for the template iterator which iterates over the list of defined result templates. Allowed values for 'filtername' are "resultname", "type", "templatename" and "folder". If 'filtername' is set to 'type' , then 'value' can be "0D", "1D", "1DC", "M0D", "M1D", or "M1DC". For all other filternames, 'value' can be an arbitrary string.
GetNextTemplate( string resultname, string type, string templatename, string folder) bool
Fills the parameter variables with the data of the next template of the list of defined result templates. The variable "resultname" will be filled with the result name of the defined template, e.g. "S11". The variable "type" will be filled with the type of the current result template and can be "0D", "1D", "1DC", "M0D", "M1D" or "M1DC". The variable "templatename" will be filled with the name of the template definition file, e.g. "S-Parameter (1D)". The variable "folder" will be filled with the relative folder where the template definition file is located (e.g. "Farfield and Antenna Properties"). If a filter was defined (see SetTemplateFilter) the method only returns the data of templates that match the filter. If the end of the template list is reached or no more templates are present that meet the defined filter, the method returns false. The method requires ResetTemplateIterator to be called in advance.
The following example shows all defined 0D Templates:
Dim Resultname As String, Templatetype As String, Templatename As String, Folder As String
ResetTemplateIterator
SetTemplateFilter("type","0D")
While (GetNextTemplate( Resultname, Templatetype, Templatename, Folder) = True)
MsgBox(Resultname & vbNewLine & Templatetype & vbNewLine & Templatename & vbNewLine & Folder)
Wend
GetFileType( string filename) string
Checks the file type of the file with absolute path specified in the variable 'filename'. If the file is a complex signal file, the string "complex" will be returned. If the file is a real-valued signal file, the string "real" will be returned. If the file type is unknown or the file can not be found, "unknown" will be returned.
GetImpedanceFromTreeItem( string treename ) Result1DComplex
If the 1D tree item with the name 'treename' can be visualized as a Smith Chart, this method returns a Result1DComplex object filled with the corresponding impedance data. If no impedance data is available, this method returns an empty Result1DComplex object.
GetFirstTableResult( string resultname) string
Returns the name of the table that was created on evaluation of the template with the name 'resultname' or an empty string.
GetNextTableResult( string resultname) string
If the template created more than one table on evaluation, this method returns the names of next table that was created on evaluation of the template with the name 'resultname'. If no more table names are available, this method returns an empty string. Please note that GetFirstTableName needs to be called before and that this method needs to be called with the same value for parameter 'resultname'.
GetTemplateAborted( ) bool
Returns true if the user aborted the template based postprocessing evaluation, otherwise false.
GetMacroPath string
Returns the first directory, that has been set as location for globally defined macros. This function is the same as "GetMacroPathFromIndex(0)"
GetMacroPathFromIndex ( long index ) string
Returns the name of the macro path referenced by the given index. The first macro path is reference by the index 0.
GetNumberOfMacroPaths int
Returns the number of defined macro directories.
RunAndWait ( string command )
Executes a 'command' and waits with the execution of the current VBA-Script until 'command' has finished. The VBA-command shell in contrast, executes a command in a second thread such that the execution of the script continues. 'command' is the command to be executed. For instance every properly installed program on the current computer can be started.
RunMacro ( string macroname )
Starts the execution of a macro.
RunScript ( string scriptname )
Reads the script input of a file.
ReportInformation ( string message )
Reports the information text message to the user. The text will be written either into the output window (if a solver is currently running) or into a message dialog box.
ReportWarning ( string message )
Reports the warning text message to the user. The text will be written either into the output window (if a solver is currently running) or into a message dialog box.
ReportInformationToWindow ( string message )
Reports the information text message to the user. The text will be written into the output window.
ReportWarningToWindow ( string message )
Reports the warning text message to the user. The text will be written into the output window.
ReportError ( string message )
Reports the error text message to the user. The text will be written into a message dialog box. The currently active VBA command evaluation will be stopped immediately. An On Error Goto statement will be able to catch this error.
SetCommonMPIClusterConfig ( string install_folder, string temp_folder, string architecture)
Set global and common information relative to all machines in MPI cluster. It is necessary to specify, in order:
• the CST MICROWAVE STUDIO installation folder. This can be a local or network path.
This latter option enables executable depot to be maintained updated and homogeneous.
• the temporary folder, for data storing on remote machines.
• the machines architecture and Operating System (OS). This field should belong to the following set:
enum {"Windows IA32", " Windows AMD64", " Linux IA32”, ”r;Linux AMD64”} type
SetCommonMPIClusterLoginInfo ( string login_user, string login_private_key_file)
Set global and common information relative to the MPI mechanism starting a Linux cluster from a Windows frontend. To enable a password less access the Linux login mechanism actually requires:
• the user name which will be used as login to the Linux cluster.
• the user private key file location. The file may be a local one or network one stored on a location shared by all cluster machines.
GetMPIClusterSize long
Return the number of machine defined in the MPI cluster.
ClearMPIClusterConfig
Reset all entries for the machine definition in the MPI cluster.
AddMPIClusterNodeConfig ( string host_name, string install_folder, string temp_folder, string architecture, bool active)
Add a new machine to MPI cluster, setting all its relevant properties:
• the CST MICROWAVE STUDIO installation folder. This can be a local or network path. If left empty, default installation folder setting is employed.
• the temporary folder, for data storing on remote machines. If left empty, default temporary folder setting is employed.
• the machines architecture and Operating System (OS). This field may belong to the following set:
enum {"Windows IA32", " Windows AMD64", " Linux IA32”, ” Linux AMD64”} type
If left empty, default architecture setting is employed.
• an activation flag to enable or disable the computation on the machine.
Example
The typical usage of these functions is in the initialization of a cluster of machines, to be used in solver MPI parallelization mode.
The following example shows the configuration of 2 nodes:
' Remove previous cluster definition
ClearMPIClusterConfig
' Set default parameters
SetCommonMPIClusterConfig(”r;C:\program files\MWS 2009”,”e:\temp\mpi”,”Windows IA32”)
' Add active nodes (with default parameter)
AddMPIClusterNodeConfig (”r;Mynode1”,””,””,””,true)
' Add second node specializing parameter
AddMPIClusterNodeConfig (”r;Mynode2”,”C:\programme\MWS 2009”,”f:\mpi”,”Windows IA32”,true)
' Enable solver MPI computation
Solver.MPIParallelization(true)
ImportXYCurveFromASCIIFile ( string folder_name, string file_name )
Imports the data of the file "fileName" to the folder "folderName"
PasteCurvesFromASCIIFile ( string folder_name, string file_name )
Pastes the data of the ASCII-file "fileName" to the folder "folderName"
PasteCurvesFromClipboard ( string folder_name )
Pastes the clipboard contents to the folder "folderName".
ScaleCurves ( string folder_name, double xScale, double yScale )
Scales the x and y data rows of all 1D plot data located in the specified folder "folder_name" of the navigation tree and in all its subfolders. 'folder_name' is a path or folder in the navigation tree. 'xScale'/'yScale' is the value multiplied with each sample of the x/y data row.
StoreCurvesInASCIIFile ( string file_name )
Stores the selected 1D or 2D plot in the specified filename as ASCII data.
StoreCurvesInClipboard
Stores the selected 1D or 2D plot in the clipboard.
DeleteResults
Deletes all results of the actual project.
GetFieldFrequency double
Returns the frequency of the currently plotted field. If no field is plotted, zero will be returned.
GetFieldPlotMaximumPos ( double_ref x, double_ref y, double_ref z ) double
GetFieldPlotMinimumPos( double_ref x, double_ref y, double_ref z ) double
Returns the maximum / minimum of the colour scale and its global position of a plot without considering the manual setting of the borders. 'x', 'y', 'z' are the absolute coordinate of the maximum / minimum as return values.
GetFieldVector ( double x, double y, double z, double_ref vxre, double_ref vyre, double_ref vzre, double_ref vxim, double_ref vyim, double_ref vzim ) bool
Returns the complex vector field value of the currently active field plot at the given position. If the field is scalar, only the vxre component has non-zero values. If no field plot is active or the given position is out of range the function returns false.
|
x |
X - value of the position of the desired field value. |
|
y |
Y - value of the position of the desired field value. |
|
z |
Z - value of the position of the desired field value. |
|
vxre |
Real part of the x-component of the field value. |
|
vyre |
Real part of the y-component of the field value. |
|
vzre |
Real part of the z-component of the field value. |
|
vxim |
Imaginary part of the x-component of the field value. |
|
vyim |
Imaginary part of the y-component of the field value. |
|
vzim |
Imaginary part of the z-component of the field value. |
ClearGeometryDataCache
Deletes the geometry data cache that has been built up by GetFieldVector.
GetMaxVectorLength ( double vxre, double vxim, double vyre, double vyim, double vzre, double vzim ) double
GetMinVectorLength ( double vxre, double vxim, double vyre, double vyim, double vzre, double vzim ) double
Returns the maximum / minimum absolute value of a three dimensional vector. 'vxre', 'vxim', 'very', 'vyim', 'vzre', 'vzim' are the real and imaginary part the vector's components.
ResetTableDefaults
Resets the table default properties to the internal default values:
|
Table plot type |
"Cartesian" |
|
Complex partner table |
" " |
|
Complex type |
"Unknown" |
The default values can be changed again by the following methods SetTablePlotTypeDefault, SetTableComplexTypeDefault and SetTableComplexPartnerDefault.
SetTablePlotTypeDefault ( enum {"Cartesian", "Polar", "Complex"} type )
Sets the default value for the table plot type.
SetTableComplexTypeDefault ( enum {"Unknown", "Real", "Imag", "MagLin", "MagdB10", "MagdB20", "Phase"} type )
Defines the default complex type for complex tables.
SetTableComplexPartnerDefault ( string treepath )
Defines the treepath for the default setting of the complex partner table.
GetApplicationName string
Returns the application name.
GetApplicationVersion string
Returns the current version number as a string.
GetInstallPath string
Returns the path where the program is installed.
GetProjectPath ( string type ) string
Gets the project path. If the name of the current project is Try and its location is in c:\MySolvedProblems, the result of this function will be
|
type |
Path returned |
|
Root |
c:\MySolvedProblems |
|
Project |
c:\MySolvedProblems\Try |
|
Model3D |
c:\MySolvedProblems\Try\Model\3D |
|
ModelCache |
c:\MySolvedProblems\Try\ModelCache |
|
Result |
c:\MySolvedProblems\Try\Result |
|
Temp |
c:\MySolvedProblems\Try\Temp |
IsBuildingModel bool
Encounters whether is currently processing the history list or not.
GetLicenseHostId string
Gets the host id for the currently used license (hardlock). This information may be useful for support purposes.
GetLicenseCustomerNumber string
Gets the current customer number from the license. This information may be useful for support purposes.
Assign ( string variable_name )
This function can be used only in connection with the BeginHide/EndHide Functions. 'variable_name' is a variable, defined within a BeginHide/EndHide block, that has to be valid outside of this block.
BeginHide
These function has an effect only if they are used in connection with the History List .
EndHide
These function has an effect only if they are used in connection with the History List .
dist2d ( int id, double x, double y ) double
Returns the spatial distance in 2d of a pickpoint to a specified position.
|
id |
Number of the requested point in the pickpoint list. |
|
x |
x-coordinate of the specific position. |
|
y |
y-coordinate of the specific position. |
dist3d ( int id, double x, double y, double z ) double
Returns the spatial distance in 3d of a pickpoint to a specified position.
|
id |
Number of the requested point in the pickpoint list. |
|
x |
x-coordinate of the specific position. |
|
y |
y-coordinate of the specific position. |
|
z |
z-coordinate of the specific position. |
ldist2D ( int id, double x1, double y1, double x2, double y2 ) double
Returns the spatial distance in 2d of a pickpoint to a line defined by two points.
|
id |
Number of the requested point in the pickpoint list. |
|
x1 |
x-coordinate of the start point of the specific line. |
|
y1 |
y-coordinate of the start point of the specific line. |
|
x2 |
x-coordinate of the end point of the specific line. |
|
y2 |
y-coordinate of the end point of the specific line. |
Rebuild
Recreates the structure by processing the History List . All results will be deleted.
RebuildOnParametricChange (bool bfullRebuild, bool bShowErrorMsgBox) bool
Updates the structure after parametric changes have been made by processing the History List. Results which should survive parametric changes will be kept, all other results will be deleted.
If bfullRebuild is True the complete history list is processed instead of only those blocks which are affected by the parametric change. If bShowErrorMsgBox is set False no message box is shown in case of an error.
Returns True if the rebuild was successful.
xp / yp / zp ( int id ) double
Returns the x / y / z-coordinate of a specified pickpoint defined by it's number in the pickpoint list.
Plot3DPlotsOn2DPlane ( bool switch )
Plots a 3D field on a 2D plane if 'switch' is True.
StoreViewInBmpFile ( string file_name )
Stores the contents of the main view into a bitmap file defined by 'file_name'.
Example: StoreViewInBmpFile ("MyPicture.bmp")
StoreViewInClipboard
Stores the contents of the main window to the clipboard as a bitmap.
UseDistributedComputingForParameters (bool flag )
Enables distributed computing for parameter sweep or optimizer runs.
Example: UseDistributedComputingForParameters ("True")
MaxNumberOfDistributedComputingParameters ( int num )
Sets the number of CST DC Solver Servers which should be used in parallel during a distribute parameter sweep / optimizer run. This is also the number of required acceleration tokens.
Example: MaxNumberOfDistributedComputingParameters (4)
UseDistributedComputingMemorySetting ( bool flag )
Enables the lower memory limit for a distributed computing run.
Example: UseDistributedComputingMemorySetting ("True")
MinDistributedComputingMemoryLimit ( int lowerLimit )
Sets the lower limit of required memory for a distributed computing run. A CST DC Solver Server with at least lowerLimit MB available memory will be used for the job.
Example: MinDistributedComputingMemoryLimit (1024)