S-parameters are calculated for a waveguide feeding network of an antenna. They are calculated in two different ways: Firstly, by an ordinary S-Parameter task, where the S-Parameters of the individual waveguide components are combined to an overall scattering matrix. Secondly, by a Simulation Project task, where all waveguide components are combined into a single MWS project, and the S-Parameters of this project are calculated.
This example shows an antenna feeding network that is composed of several individual wave guide components. Use View->Layout to check the 3D view of the entire assembly.
Additionally, a 3D simulation project is set up to verify the schematic simulation.The 3D simulation project can be opened by the corresponding entry in the context menu of the "Full_3D" task.