淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
 
 

CST视频教程推荐   CST微波工作室入门与应用详解   |  CST使用操作基础

          首页 >> CST教程 >> CST2013在线帮助系统

Exclude Port-Modes

Post Processing: Signal Post Processing S-Parameter CalculationsExclude Port-Modes...

This dialog makes it possible to choose which port-modes will be considered for post processing or otherwise will be excluded. Port-modes that have been excluded can be regained by switching the status back to not excluded. No additional solver runs are necessary for this issue because it is done as a post processing step.

 

This feature allows to renormalize a subset of S-Parameters if all port-modes that were not previously excited are excluded from post processing. In the same way it is also possible to achieve single-ended S-Parameters even if not the complete S-Matrix was calculated.

 

For ports with the single-ended feature switched on it is only possible to exclude all (or none) of the calculated modes.

 

Port

In this column, the port number identifying the port is displayed.

Mode

The mode patterns for the S-Parameters are listed here.

Status

Displays if the corresponding port-mode is excluded or not excluded.

Toggle Status

Switches  the status display between excluded and not excluded.

OK

Accepts your settings and leaves the dialog box.

Cancel

Closes this dialog box without performing any further action.

Help

Shows this help text.

 

See also

S-Parameter Overview

 

 

 




HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


 

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系:mweda@163.com