首页 >> CST教程 >> CST2013在线帮助系统 |
Import STL FileModeling: ExchangeImport/ExportImport3D FilesSTLMost of today鈥檚 CAD systems offer STL import/export options.In case your CAD system does not support SAT or IGES export you might import structure data via the STL interface. Though STL data export/import is very common, STL data import can take some time and might lead to a very slow meshing process, because every triangle will be converted to an ACIS FACE.If you have the choice between a high end data format like SAT / IGES and STL 鈥?choose the high end format, because further operations on the structure will be much faster.Open Opens the selected STL file, adds its data to your model and leaves the dialog box. Cancel Closes this dialog box without performing any further action. Copy file to project Use this option to copy the import file to the project folder. If you save your project to another destination the imported file is copied automatically. For more information see Copy_file_to_project. Scale to current unit Enables scaling of the imported model to the currently active unit. As the units of the import model are not defined in the import file you have to specify the units of the import model in the 'Import file units' drop down list. If not activated no scaling occurs. Import file units In the drop down list you can specify the units of the import model. These controls are only active when the option 'Scale to current unit' is checked. Help Shows this help text. See also Importing and Exporting Models
HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程 |
Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系:mweda@163.com |