Import NASTRAN
Exchange Import/ExportImport3D FilesNASTRAN
From within this dialog you can import NASTRAN files.
Because the program is based on the ACIS kernel which uses the SAT
data format, NASTRAN data need to be converted to ACIS data.
The import supports the following data structures of NASTRAN files:
GRID, CHEXA, CQUAD4, CTETRA, CPENTA, CBAR, CROD, CBEAM, CTRIA3, PBAR,
PROD, PBEAM, PSHELL, PSOLID, MAT1.
Open
Opens the selected NASTRAN file,
adds the structure to your model and leaves the dialog box.
Cancel
Closes this dialog box without performing any
further action.
Copy file to project
Use this option to copy the import file to the project
folder. If you save your project to another destination the imported file
is copied automatically. For more information see Copy_file_to_project.
Import
attributes
Enables the import of solid names, wire names, material
names and material color from the import file.
Note: Importing
the attributes usually needs more memory.
Scale to current unit
Enables scaling of the imported model to the currently
active unit. As the units of the import model are not defined in the import
file you have to specify the units of the import model in the 'Import
file units' drop down list. If not activated no
scaling occurs.
Import file units
In the drop down list you can specify the units
of the import model. These controls are only active when the option 'Scale
to current unit' is checked.
Import options
Read points
only: Check this box if you only want to read the points of the
NASTRAN file. The points will be written in a textfile added to the navigation
tree.
Read triangle
info only: Check this box if you only want to read the triangle
info of the NASTRAN file. The normal vector and the center coordinates
of each triangle will be written in a textfile added to the navigation
tree.
Always create
wires: Use this option to import the curves of the model as wires.
Solid wire
model: This box is activated if the 'Always create wires' box has
been checked. Use this option to import the wires as solid wires.
Decimation:
Check this box if you want to activate the triangle decimation.
Properties...:
This button will be activated if the decimation box has been checked.
After you press this button, the settings dialog for Triangle
Decimation will appear and you can change the default triangle decimation
settings.
Help
Shows this help text.
See also
Importing
and Exporting Models
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|
淘宝官方店 
