Import DXF/GDSII Data
ExchangeImport/ExportImport2D/EDA FilesDXF
ExchangeImport/ExportImport2D/EDA FilesGDSII
In this dialog box all layers which are available in the DXF or GDSII
file are listed. Use the elevation and thickness settings to create the
stack-up information which is appropriate for the technology used.
DXF/GDSII Layer
The layer name as defined in the file. If the
check box is not marked, this layer will not be imported.
Material
The material name which should be used for this
layer.
Elevation
The offset in z/w-direction.
Thickness
The thickness of this layer.
Etch factor
The etch factor of this layer. If this value
is set to zero, no etching is applied (which is equivalent to an infinite
etch factor).
Modify layers
Select All:
Press this button to mark all layers as used for the import.
Select None:
All layers are deselected.
Copy Layer:
Copies the layer which is currently selected.
Delete Layer:
Deletes the selected layer.
Technology file
Import...:
Load the stack-up information from a technology file. The present
stack-up information is deleted.
Export...:
Save the current stack-up information to a technology file.
OK
Imports the DXF or GDSII file with specified
stackup.
Cancel
Closes this dialog box without performing any
further action.
Help
Shows this help text.
See also
Importing
and Exporting Models,Import DXF
File, Import GDSII File
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|