Cutting Plane
Sectional View  Cutting PlaneProperties
In this dialog box you can set a cutting plane for your structure.
The structure will be hidden, left as wire frame or set to transparent
at the upper side of the cutting plane and left as before below the cutting
plane. Thus you will be able to have a look inside your structure.
Cutplane control frame
Use cutplane: Switch
off the structure cutting plane.
Align cutplane
with axis: Use the structure cutting plane, aligning it to the
standard (XYZ) coordinate system.
Align cutplane
with WCS : Use the structure cutting plane, aligning it to the
local (WCS) coordinate system.
Free cutplane control:
Use the structure cutting plane with the previously set alignment and
make the rotation and pitch sliders (see below) available. Also a 'help'
plane will be visualized, marking the normal and the 'up'-direction of
the plane to help with orientation.
Axis: Align
the cutting plane with respect to the chosen control mode. (e.g. in axis-aligned
mode choose 'X' to align it with the YZ-plane)
Location
Position slider: Move the cutting plane along the plane normal.
Note: In 'axis aligned
control' mode the indicated position is the spatial plane position on
the respective axis. In any other mode the indicated position is calculated
with respect to the slider position. (Slider at 50% has always an indicated
position of 0.0, which marks the center of the range in which the plane
can be moved; slider above or below 50% will make the indicated position
give the spatial distance to the center of a.m. range)
Rotation slider: Rotate the cutting plane around the up-vector
which is indicated on the 'help' plane (see 'Free cutplane control' mode).
Angle is given in degrees.
Note: Only available
in 'Free cutplane control' mode (see above).
Pitch slider: Rotate
the cutting plane with the up-vector which is indicated on the 'help'
plane (see 'Free cutplane control' mode). Angle
is given in degrees.
Note:
Only available in 'Free cutplane control' mode (see above).
By Index:
If you select this option, the cutting plane can only be set on mesh planes.
Also the output of the plane location shows the mesh index rather than
the spatial location of the cutting plane. This setting can only be used
if a valid mesh is already created.
Note: This option is only available for hexahedral
meshes with 'axis aligned control' mode (see above).
Appearance of part above cutplane frame
Changes the appearance of the removed part of
your structure.
Hide:
Don鈥檛 display the removed part at all.
Wireframe:
Display it as wire frame.
Transparent:
Display it as transparent.
Solid:
Display the removed part, but also shows the cutting plane.
Note that this setting will not be used if you
have activated the Wireframe
in
Options View Options
( ) 鈥?General
or clicked the
VisibilityWire
Frame ( ) control. If the fields are displayed on a 2D plane and the Transparent shapes in field plot mode
is activated this
frame is disabled.
Options frame
Transparent shapes
in field plot mode: Display all the shapes transparent when the
field plot mode is activated.
Draw 2D when cut plane
is active: Display the
structure in a flat and true 2D style.
Draw solid cutplane:
If this field is checked, the cutting plane will be displayed as solid
in the shapes color. Otherwise it will be transparent.
2D fields on selected
shapes only: Draw cutlines and 2D fields only for the selected
shapes for a better performance or visibility.
Cutplane location
in selected shape only: Move the cutting plane relative to the
selected shape only. This feature offers you a better cutting plane handling
for small details within bigger structures.
Close
Closes this dialog box.
Apply
Applies any changes to the visualization. Only
active if changes in the edit fields have been made.
Help
Shows this help text.
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|
淘宝官方店 
