Local Mesh Property (Tetrahedral )
Mesh ControlLocal Properties
(
Groups:Mesh Groups:meshgroup1Local Mesh Properties)
(
Components:solid1Local Mesh Properties)
(
Wires:wire1Local Mesh Properties)
This dialog allows you to control the mesh properties
of one or more selected objects. In case of multiple selected objects
(holding down the CTRL key while selecting
a shape), the check boxes are in an undefined state such that they
are neither checked nor unchecked.
Consider
for simulation: Choose whether or not the selected shape should
be considered by the calculation.
Consider
for bounding box: Choose whether or not the selected shape should
be considered for the bounding box calculation.
Both Consider
for simulation and Consider for
bounding box settings are applied at the object level, and are
not part of mesh group settings.
Mesh group
Provide a mesh group name. Mesh groups are used
to group objects (i.e. Solids and Wires) together. They hold a set of
local mesh properties and these settings are inherited by the objects
which are part of the mesh group. If an object is removed from the mesh
group, its local mesh properties are reset to default.
Maximum mesh step width
The prescribed width is an absolute value. The
automatic mesh generator will not exceed this step width for this structure
element. If a zero value is specified (default), it will
be ignored and the mesh size will be controlled by the global setting,
see Tetrahedral
Mesh Properties. In the navigation tree, an object with a nonzero
mesh step width will be signalled by the icon,
if the mesh view
is active.
OK
Accepts the input and closes the dialog.
Cancel
Closes this dialog box without performing any
further action.
Help
Shows this help text.
See also
Tetrahedral
Mesh Properties, Mesh
View (Tetrahedral), Mesh
Generation Overview (Tetrahedral)
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|