Curve selection frame
Apply changes to: In this list you can select the curves to which changes should be applied to. Multiple curves can be selected by holding down the CTRL - key while clicking on an entry.
Select All: This button selects all the shown curves.
Line style frame
Auto color: This radio button sets the color to the default color.
Auto grey: This radio button resets the color to the default color, but reduced to the grey scaled color.
User defined color: This radio button selects the current user defined color. If you want to change the color, press the '...'-button. This opens the color selection dialog.
Marker style frame
Auto: This radio button disables all marks unless the curve has less than 20 data points in the current view.
Additional marks: Select this radio button to add marks to the curve. For example, this might be helpful to distinguish curves that are lying very close to each other or have identical colors.
Marks only: Use this button to omit the lines between the marks and show only the marks at each discrete curve value.
No marks: This radio button disables all marks.
OK
Applies the current settings to the selected curves and closes the dialog box.
Apply
Applies the current settings to the selected curves without closing the dialog box.
Defaults
Resets the selected curves to default values.
Cancel
Closes this dialog box without performing any further action.
Help
Shows this help text.
See also