淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Variables in Designer >
Defining Parameter Defaults >
Defining a New Parameter Default by Starting at the Design Level

Defining a New Parameter Default by Starting at the Design Level

To define a new parameter default by starting at the design level:

1. In the project tree, right-click the design for which you want to define a parameter default.

2. Select Design Properties.

3. Select the Parameter Defaults tab.

4. Select Value.

5. Click Add. The Add Property dialog box opens.

6. Select Variable.

7. In the Name box, type a variable name.

8. In the Value box, type a valid numerical quantity.

9. Click OK or press Enter.

10. Do either of the following:

• To add another parameter default, click Add or press Enter.

• To stop adding parameter defaults, click OK.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程

　


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com