淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Schematic Editor >
Starting the Schematic Editor >
Zooming and Panning the View

Zooming and Panning the View

You can magnify (zoom in) or shrink (zoom out) the contents in the view window, or on a rectangular area in the view window. You can pan (scroll) the view in any direction.

To zoom in on the contents in the view window:

1. Click Zoom In on the View menu, or right-click in the schematic window and select Zoom In from the popup menu.

2. The view zooms in to a larger magnification. The absolute size of the model does not change.

3. Repeat the operation until the desired magnification is achieved.

To zoom out on the contents in the view window:

1. Click Zoom Out on the View menu, or right-click in the schematic window and select Zoom Out from the popup menu.

2. The view zooms out to a smaller magnification. The absolute size of the model does not change.

3. Repeat the operation until the desired magnification is achieved.

To magnify a specific rectangular area in the view window:

1. On the View menu, click Zoom Area, or right-click in the schematic window and select Zoom Area from the popup menu.. The cursor changes to a magnifying glass.

2. Draw a rectangle (or square) by selecting two diagonally opposite corners. This is the area where magnification will be increased.

The rectangular area is magnified in size and the cursor returns to normal. The absolute size of the model does not change.

Restoring a Previous Zoom View

After executing a zoom in or zoom out operation, you can return to the previous magnification by selecting Zoom Previous from the View pulldown.

Panning the View

To pan (scroll) the view in any direction, hold down the left mouse button and click the SHIFT key. The view is attached to the cursor. Hold down the mouse button and move the cursor to pan the view in any direction. Release the mouse button to end the panning operation.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com