淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

HFSS and Planar EM Simulators >
Planar EM Technical Notes >
The MPIE Method >
MPIE Method Implementation

MPIE Method Implementation

To calculate the S-matrix associated with a structure, Designer does the following:

• Divides the structure into a 2.5D or 3D surface mesh.

• Computes the currents on each port of the structure that are supported by a transmission line having the same cross-section as the port.

• Computes the full current distribution on the surface of the structure.

• Computes the generalized S-matrix from the amount of reflection and transmission that occurs.

The final result is an S-matrix that allows the magnitude of transmitted and reflected signals to be computed directly from a given set of input signals.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com