淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

HFSS and Planar EM Simulators >
Working with Materials >
Filtering Materials

Filtering Materials

If you want to remove certain materials or material properties from the list in the Select Definition window, use the filter options under the Material Filters tab. You can filter out materials based on the product or library with which they are associated. You can also filter out material properties and types of material properties. And you can remove the filtering in order to see all available material properties.

To filter materials or material properties listed in the Select Definition window, using the choices in the Materials tab:

1. The text field under Libraries lists the libraries for the project. Selecting the listed library highlights it and cause the table to display the materials in that library.

2. Above the Libraries area, you can check or uncheck boxes to show or hide Project Definitions and All Libraries.

• With both unchecked, nothing appears in the materials table. With both checked, the table shows all materials and highlights those used in the project.

• With only Project Definitions checked, the materials table shows only the materials used in the project.

• With All Libraries checked, the table displays all materials, but may not show all available properties.

To filter out or show additional material properties in the Materials tab:

1. Click the Material Filters tab.

2. Under Filter Materials and Properties for, select one of the radio buttons:

• Click Select All to select all of the products listed. Click Clear to clear all product selections.

• Active Design to display properties used in the active design.

• This Product to display properties commonly used by this product.

• All Products to display all properties available. Selecting this enlarges the table of properties shown under the Materials tab to show all properties possible. You can use the scroll bars or size the dialog to see all properties.

3. Click the Materials tab to save your selections.

Click Cancel to revert back to the last saved selections.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com