淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Optimetrics >
   Setting up an Optimization Analysis >
       Adding a Cost Function >
           Setting a Goal Value >
               Specifying a Single Goal Value

Specifying a Single Goal Value

1. Under the Goals tab in the Setup Optimization dialog box, click Edit Goal/Weight.

The Edit Goal/Weight dialog box appears.

2. Under the Goal Value tab, click Simple Numeric Value in the Type list.

3. If the goal value is complex, click real/imag in the pull-down list to the right if you want to specify the real and imaginary parts of the goal value.

Alternatively, click mag/ang if you want to specify the magnitude and angle of the goal value.

4. Type the goal value in the Goal Value table.

If the goal value is complex, type both parts of the goal value in the text box below the Goal Value heading. For example, type 1, 1 to specify the real part of the goal value as 1 and the imaginary part as 1.

If the goal value is real, type a real goal value in the text box below the Goal Value heading.

5. Click OK.

The goal value you specified appears in the Goal text box.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com