淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Optimetrics >
Setting up an Optimization Analysis >
Solving a Parametric Setup Before an Optimization

Solving a Parametric Setup Before an Optimization

(Planar EM only)

Solving a parametric setup before an optimization setup is useful for guiding Optimetrics during an optimization.

To solve a parametric setup before an optimization setup:

1. In the Setup Optimization dialog box, click the General tab.

2. In the Parametric Analysis pull-down list, click the parametric setup you want Optimetrics to solve before optimization.

Note

The parametric setup must include sweep definitions for the variables you are optimizing.

3. Select Solve the parametric sweep before optimization.

If the parametric setup has not yet been solved, Optimetrics will solve it. Optimetrics uses the cost value evaluated at each parametric design variation to determine the next step in the optimization analysis. This enables you to guide the direction in which the optimizer searches for the optimal design variation.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com