淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Optimetrics >
Setting up an Optimization Analysis >
Setting the Min. and Max. Step Sizes

Setting the Min. and Max. Step Sizes

The step size is the difference in a variable’s value between one solved design variation and the next. The step size is determined when Optimetrics locates the next design variation that should be solved in an effort to meet the cost function.

1. In the Setup Optimization dialog box, click the Variables tab.

2. Click Advanced.

Optimetrics displays Min. Step and Max. Step columns, with default values for each variable to be optimized.

3. In the Min. Step text box, type the minimum step size value. Optionally, modify the unit system in the Units text box.

4. In the Max. Step text box, type the maximum step size value. Optionally, modify the unit system in the Units text box.

Hint

A value of zero is recommended for the minimum step size.

The topics for this section include:

Step Size

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com