淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Optimetrics >
Tuning a Variable >
Modifying the Value of a Fixed Variable

Modifying the Value of a Fixed Variable

If you are not including a variable in an optimization, sensitivity, or statistical analysis, Optimetrics uses that variable’s current value during the analysis.

To override the current value of a fixed variable for an Optimetrics setup:

1. Do one of the following:

• In the Setup Optimization dialog box, click the Variables tab.

• In the Setup Sensitivity Analysis dialog box, click the Variables tab.

• In the Setup Statistical Analysis dialog box, click the Variables tab.

2. Click Set Fixed Variables.

The Setup Fixed Variables dialog box appears. Under Fixed Variables, all of the current independent variable values are listed.

3. Click the Value text box of the variable with the value you want to override.

4. Type a new value in the Value text box, and then press Enter.

The Override option is now selected. This indicates that the value you entered will be used for this Optimetrics setup; the current variable value set for the nominal design will be ignored.

Note

Alternatively, you can select the Override option first, and then type a new value in the Value text box.

5. Optionally, click a new unit system in the Units text box.

To revert to a default variable value, clear the Override option.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com