• 首页
• HFSS教程
• ADS教程
• CST教程
• 射频工程师培训
• 微波仪器操作培训
• 天线设计培训
• 射频专业基础课

Ansoft Designer / Ansys Designer 在线帮助文档：

Optimetrics >
   Setting a Linear Constraint >
       Modifying a Linear Constraint           

Modifying a Linear Constraint

1. Do one of the following:

• If you are setting up an optimization analysis: In the Setup Optimization dialog box, click the Variables tab.

• If you are setting up a sensitivity analysis: In the Setup Sensitivity Analysis dialog box, click the Variables tab.

2. Click Linear Constraint.

The Linear Constraint dialog box appears.

3. Click the row listing the constraint you want to modify, and then click Edit.

The Edit Linear Constraint dialog box appears.

4. Optionally, click a Coeff text box and type a new coefficient value.

5. Optionally, click a different condition, < (less than) or > (greater than), in the pull-down list.

6. Optionally, type a different inequality value in the text box to the right of the condition, and then click OK.

You return to the Linear Constraint dialog box. The new coefficient value, the condition, and the inequality value appear in the LHS (left-hand side), Condition, and RHS (right-hand side) columns, respectively.

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com