 淘宝官方店 推荐课程 在线工具 联系方式 关于我们 |
|
|
微波射频仿真设计 |
|
| 淘宝官方店 推荐课程 在线工具 联系方式 关于我们 |
|
|
微波射频仿真设计 |
|
| 首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档 |
|
Optimetrics > Cost FunctionOptimetrics manipulates the model’s design variable values to find the minimum location of the cost function; therefore, you should define the cost function so that a minimum location is also the optimum location. For example, if you vary a design to find the maximum transmission from Wave Port 1 to Wave Port 2 (S21=>1), define the cost function to be -mag(S(WavePort2,WavePort1)). When using the Quasi Newton optimizer, which is appropriate for designs that are not sensitive to noise, the best cost function is a smooth, second-order function that can be approximated well by quadratics in the vicinity of the minimum; the slope of the cost function should decrease as Optimetrics approaches the optimum value. The preferred cost function takes values between 0 and 1. In practice, most functions that are smooth around the minimum are acceptable as cost functions. Most importantly, the cost function should not have a sharp dip or pole at the minimum. A well designed cost function can significantly reduce the optimization process time. The cost function is defined in the Setup Optimization dialog box when you set up an optimization analysis. If you know the exact syntax of the solution quantity on which you want to base the cost function, you can type it directly in the Calculation text box. Otherwise, you can create an output variable that represents the solution quantity in the Output Variables dialog box. Related TopicsExplanation of L1, L1, Norm Costs in Optimization Example of More Complex Cost Functions
HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程 |
|
Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com |
|
Ansoft Designer / Ansys Designer 在线帮助文档：
