淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
 
 

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装

 

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office

          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档:


Nexxim Simulator >
Nexxim Component Models >
Nexxim Ideal Distributed >
   Transmission Line, Physical Length with Reference       

Transmission Line, Physical Length with Reference

 

Netlist Form

An instance of a transmission line with physical length and reference nodes has the following Nexxim netlist syntax:

Axxx n1 n2 n3 n4 P=val Z=val K=val F=val [A=val] COMPONENT=trlk

n1 and n2 are the nodes connected to the transmission line. n3 and n4 are the reference nodes. The entry COMPONENT=trlk identifies the element as a transmission line, physical length.

 


Transmission Line, Physical Length with Reference Instance Parameters

Parameter

Description

Units

Default

P

Electrical length at reference frequency

Meter

1e-3

Z

Reference characteristic impedance

Ohm

50

K

Dielectric constant

 

1.0

F

Reference frequency

Hz

1e9

A

Attenuation at reference frequency

dB/m

0.0


Netlist Example

Atrle1 trin trout refin refout P=55 Z=65 F=2e9 COMPONENT=trle

Notes

1. A lossless line is assumed unless parameter A is assigned a non-zero value. Attenuation is then scaled in inverse proportion to the square root of the frequency.




HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


 

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系:mweda@163.com