淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

Ansoft Designer / Ansys Designer 在线帮助文档：

Inductor, Toroidal, Physical Model

Netlist Syntax

The general syntax for a toroidal inductor, physical model is:

Axxxx n1 n2 N=val MU=val DO=val DI=val T=val RB=val D=val COMPONENT=toroidal_inductor_physical

n1 is the positive node and n2 is the negative node of the inductor. The current is assumed to flow from n1 through the inductor to n2.

The parameter COMPONENT=toroidal_inductor_physical identifies the element as a toroidal inductor, physical model.

**Toroidal Inductor, Physical Model Instance Parameters**
Instance Parameter	Description	Unit	Default
N	Number of turns	None	None
MU	Relative permeability of core	None	None
DO	Outer diameter of core	Meter	None
DI	Inner diameter of core	Meter	None
T	Thickness of core	Meter	None
RB	Conductor resistivity	m-Ohm/cm	0.001
D	Diameter of wire	Meter	None

A1 Port1 Port2 N=10 MU=2 DO=5*2.54e-5 DI=3*2.54e-5 T=0.1*2.54e-5 RB=0.001 D=2.54e-5 COMPONENT=toroidal_inductor_physical


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com